VERTICAL PUMPS

ST50 - 30 - 10_edited_edited.jpg

ST50-ST30-ST10

In-tank assembly

  • 1,300-5,000L/h

  • High efficiency: 3 times higher than the market average pumps

  • Important energy savings

  • Improves productivity through enhanced hydraulic performances

  • Quiet and vibration-free operation

  • Ultracompact design

  • Dry run possible without deteriorations

  • Sturdy and safety of operation

  • High-density version available on request (up to d=2m)

  • Typical applications

  • Electroplating baths, rinse bath, acids, alkalis, chemically contaminated fluids, corrosive media and effluents

  • Works in the bath only (a version that works outside of the tank is also available)

ST42 - 22.jpg

ST42-ST22

Out of tank assembly

  • 2,000-4000L/h

  • High efficiency: 3 times higher than the market average pumps

  • Important energy savings

  • Improves productivity through enhanced hydraulic performances

  • Quiet and vibration-free operation

  • Ultracompact design

  • Design ultracompact

  • Dry run possible without damage to the pump

  • Robust and reliable

  • High-density version available on request (up to d=2m)

  • No overflow flow rate thanks to counter turbine

T70 - T200.jpg

T70-T200

In-tank assembly

  • 7,200-18,500L/h

  • Injected polypropylene or PVDF: great resistance to acids and alkaline

  • Closed centrifugal impeller with diffusor: great efficiency

  • The impeller is driven by a cantilever shaft: No mechanical seal, dry run without
    the problem, no wear pieces, no leakage risks

  • Incorporated strainer to the volute: enhanced pump safety

T101-201.jpg

T101-T201

In-tank assembly

  • 10,000-18,500L/h

  • Injected polypropylene or PVDF: great resistance to acids and alkaline

  • Closed centrifugal impeller with diffusor: great efficiency

  • The impeller is driven by a long shaft with ceramic bearing: no mechanical seals, no risks of leakage, drive shaft height up to 756 mm, great liquid level variation
    possibilities

  • Ceramic lower shaft 99% alumina

  • Incorporated strainer to the volute: enhanced pump safety

T72 - 202.jpg

T72-T202

Out of tank assembly

  • 7,000-20,000L/h

  • The impeller is driven by a cantilever shaft with back impeller ST22 to T262 versions

  • No mechanical seal, dry run without a problem

  • Injected polypropylene or PVDF: great resistance to acids and alkalines

  • Closed centrifugal impeller with diffusor: great efficiency

  • Incorporated strainer to the volute (external for T72): enhanced pump safety

T242 - 262.jpg

T242-T262

Out of tank assembly

  • 17,000-27,000L/h

  • In-tank or out of tank assembly

  • The impeller is driven by a cantilever shaft with back impeller ST22 to T262 versions

  • No mechanical seal, dry run without a problem

  • Injected polypropylene or PVDF: great resistance to acids and alkaline

  • Closed centrifugal impeller with diffusor: great efficiency

  • Incorporated strainer to the volute: enhanced pump safety

  • Connection : union nut

  • Option: grooved nozzle, flanges, square fixation plate 302mm wide

GET IN TOUCH

Metsurfin Pvt Ltd, 629, JMD Megapolis
Sohna Road, Sector 48
Gurgaon 122018, Haryana, India

+91-124-4064951, +91-9654455797 (PP: Mrs Kala)

Thanks for submitting!